Product Category
Milling Inserts
Milling inserts are selected around the cutter body they fit and the operation being performed — face milling, shoulder milling or profiling. Our milling insert range includes positive and square geometries for general-purpose face milling as well as round inserts for profile and plunge work, supplied to VMC-heavy manufacturing units across Chakan MIDC and Pune.
APMT 1135
APMT inserts are positive-geometry milling inserts commonly used in face and shoulder milling cutters. The positive rake keeps cutting forces lower than an equivalent negative insert, which helps on lighter-duty machines and thinner-walled workpieces.
APMT 1604
APMT inserts are positive-geometry milling inserts commonly used in face and shoulder milling cutters. The positive rake keeps cutting forces lower than an equivalent negative insert, which helps on lighter-duty machines and thinner-walled workpieces.
APKT 1604
APKT inserts are positive-geometry milling inserts used in face and shoulder milling cutter bodies, similar in application to the APMT family but with a different clamping/hole configuration as set out by the insert's ISO type letter.
SEKT 1204
SEKT inserts use a square cutting geometry commonly used in face milling cutter bodies, giving four usable cutting edges per insert for general-purpose milling on steel, stainless steel and cast iron.
RPMT 1204
RPMT inserts use a round cutting geometry, which is useful for profile milling, plunge milling and producing fillets or radii that a straight-edged insert cannot form directly.
How to Choose Milling Inserts
Match the insert shape to the cutter body it needs to fit — APMT and APKT inserts use different clamping/hole configurations even though both are positive-geometry face/shoulder milling inserts, so check your existing cutter body's insert type before ordering.
Square inserts (SEKT) give four usable edges for general face milling, while round inserts (RPMT) are used specifically for profile and plunge milling where a straight edge can't form the required radius.
Frequently Asked Questions
- Will any milling insert fit my cutter body?
- No — milling inserts are matched to a specific cutter body's insert pocket (APMT, APKT, SEKT and RPMT are not interchangeable with each other). Tell us your cutter body brand and size and we'll confirm compatible insert options.
- Which milling insert is best for aluminium?
- General-purpose milling inserts can work on aluminium, but a sharper, polished positive geometry usually gives a better finish and less built-up edge. See our PCD inserts range for higher-volume aluminium work.
- How many cutting edges does a face milling insert have?
- It depends on the shape — square inserts like SEKT typically give four usable edges, while triangular and round shapes vary. Check the specific product page for the insert you're using.
Need a quote on a specific tool?
Send us your product, SKU or specification and we'll respond with availability and pricing.