Product Category
Turning Inserts
Turning inserts are the most frequently replaced cutting tool on any CNC lathe, and getting the right shape, geometry and edge count for the job directly affects both cycle time and cost per component. Our turning insert range covers the common ISO shapes used across job shops and production lines in Chakan, Pune and PCMC — from strong-edged 80° rhombic and square inserts for roughing, to sharper positive-rake inserts for finishing slender or thin-walled parts.
CNMG 120408
CNMG inserts use an 80° rhombic (diamond) shape with a negative rake geometry, giving a strong cutting edge that suits medium-to-heavy roughing as well as general external turning on steel, stainless steel and cast-iron components. The negative-type, double-sided design gives two usable cutting edges per face, which keeps the effective cost per edge competitive for job shops and production lines running multiple shifts.
CNMG 120404
CNMG inserts use an 80° rhombic (diamond) shape with a negative rake geometry, giving a strong cutting edge that suits medium-to-heavy roughing as well as general external turning on steel, stainless steel and cast-iron components. The negative-type, double-sided design gives two usable cutting edges per face, which keeps the effective cost per edge competitive for job shops and production lines running multiple shifts.
CNMG 120412
CNMG inserts use an 80° rhombic (diamond) shape with a negative rake geometry, giving a strong cutting edge that suits medium-to-heavy roughing as well as general external turning on steel, stainless steel and cast-iron components. The negative-type, double-sided design gives two usable cutting edges per face, which keeps the effective cost per edge competitive for job shops and production lines running multiple shifts.
TNMG 160404
TNMG inserts use a 60° triangular negative geometry, giving three cutting edges per face and a versatile approach-angle range that suits general and semi-finish turning across steel, stainless steel and cast-iron components. The triangular shape is a common first choice in job shops that need one insert style to cover several turning operations on a single machine.
TNMG 160408
TNMG inserts use a 60° triangular negative geometry, giving three cutting edges per face and a versatile approach-angle range that suits general and semi-finish turning across steel, stainless steel and cast-iron components. The triangular shape is a common first choice in job shops that need one insert style to cover several turning operations on a single machine.
TNMG 160412
TNMG inserts use a 60° triangular negative geometry, giving three cutting edges per face and a versatile approach-angle range that suits general and semi-finish turning across steel, stainless steel and cast-iron components. The triangular shape is a common first choice in job shops that need one insert style to cover several turning operations on a single machine.
CCMT 09T304
CCMT inserts use an 80° rhombic positive geometry. The positive rake reduces cutting forces compared with a negative insert, which makes this family a common choice for turning slender or thin-walled components, and for finishing passes on steel, stainless steel and non-ferrous parts where lower vibration and a sharper edge are useful.
CCMT 09T308
CCMT inserts use an 80° rhombic positive geometry. The positive rake reduces cutting forces compared with a negative insert, which makes this family a common choice for turning slender or thin-walled components, and for finishing passes on steel, stainless steel and non-ferrous parts where lower vibration and a sharper edge are useful.
CCMT 060204
CCMT inserts use an 80° rhombic positive geometry. The positive rake reduces cutting forces compared with a negative insert, which makes this family a common choice for turning slender or thin-walled components, and for finishing passes on steel, stainless steel and non-ferrous parts where lower vibration and a sharper edge are useful.
DCMT 11T304
DCMT inserts use a 55° rhombic positive geometry. The narrower point angle allows access into tighter profiles and contours, which makes this family a common choice for copy-turning and profiling operations, as well as finishing passes on steel, stainless steel and non-ferrous components.
DCMT 11T308
DCMT inserts use a 55° rhombic positive geometry. The narrower point angle allows access into tighter profiles and contours, which makes this family a common choice for copy-turning and profiling operations, as well as finishing passes on steel, stainless steel and non-ferrous components.
DNMG 150404
DNMG inserts use a 55° rhombic negative geometry, combining a narrower point angle with the edge strength of a negative-type insert. This family is commonly used for external turning and profiling operations on steel, stainless steel and cast-iron components where both accessibility and edge strength matter.
DNMG 150608
DNMG inserts use a 55° rhombic negative geometry, combining a narrower point angle with the edge strength of a negative-type insert. This family is commonly used for external turning and profiling operations on steel, stainless steel and cast-iron components where both accessibility and edge strength matter.
WNMG 080404
WNMG inserts use an 80° trigon (three-cornered) negative geometry, giving three cutting edges per face on a compact insert body. This family is a common, economical choice for general external turning and medium roughing on steel, stainless steel and cast-iron components.
WNMG 080408
WNMG inserts use an 80° trigon (three-cornered) negative geometry, giving three cutting edges per face on a compact insert body. This family is a common, economical choice for general external turning and medium roughing on steel, stainless steel and cast-iron components.
VBMT 160404
VBMT inserts use a 35° rhombic positive geometry. The sharp point angle is well suited to profiling and contour turning where the tool needs to follow a changing radius, and the positive rake keeps cutting forces low on slender components.
VBMT 160408
VBMT inserts use a 35° rhombic positive geometry. The sharp point angle is well suited to profiling and contour turning where the tool needs to follow a changing radius, and the positive rake keeps cutting forces low on slender components.
TCMT 16T304
TCMT inserts use a 60° triangular positive geometry. Three usable cutting edges per face combined with a positive rake make this family a practical, economical option for light turning and finishing passes across steel, stainless steel and non-ferrous materials.
TCMT 16T308
TCMT inserts use a 60° triangular positive geometry. Three usable cutting edges per face combined with a positive rake make this family a practical, economical option for light turning and finishing passes across steel, stainless steel and non-ferrous materials.
SNMG 120408
SNMG inserts use a square (90°) negative geometry, giving the strongest possible cutting edge angle among common turning-insert shapes. This makes the family well suited to heavy roughing and high feed-rate turning on steel, stainless steel and cast-iron components where edge strength matters more than access to fine contours.
How to Choose Turning Inserts
Start with the operation and material: 80° rhombic (CNMG) or square (SNMG) shapes give the strongest edge for roughing, while 55°/35° rhombic (DCMT/VBMT) and triangular (TNMG/TCMT) shapes suit finishing and profile work where a narrower point angle is needed.
Negative inserts (the 'N' in codes like CNMG, TNMG, DNMG, WNMG, SNMG) are typically double-sided and give more edges per insert; positive inserts (CCMT, DCMT, VBMT, TCMT) cut with lower force, which helps on slender components and lower-power machines.
Frequently Asked Questions
- Which turning insert is best for roughing steel?
- For heavy roughing, an 80° rhombic negative insert (CNMG) or square negative insert (SNMG) gives the strongest cutting edge. Confirm your depth of cut and machine power with us and we'll suggest a suitable starting point.
- What's the difference between a negative and positive turning insert?
- Negative inserts have a 0° relief angle and are usually double-sided for more cutting edges per insert; positive inserts have a relief angle ground in, cut with lower force, and are commonly used for finishing or on lighter machines.
- Can the same turning insert be used on both steel and stainless steel?
- Some can, but stainless steel work-hardens easily and often benefits from a sharper edge or different grade than a general steel insert. Tell us your material and operation and we'll help you choose.
Need a quote on a specific tool?
Send us your product, SKU or specification and we'll respond with availability and pricing.